 | Step 1: It incorporates a transparent cover which opens to allow access to the CAT-5 wire connector. The cover flips up easily by inserting your fingernail under the two hooks behind the cover and gently pulling upwards. |
 | Step 2: Hold straightened wire pair approximately 3/4 of an inch from the end and insert firmly (with a slight upward motion) into rectangular opening just below "+" and "-" symbols. NO NEED TO STRIP THE SIRES! Designed for use with solid 24 AWG wire. |
 | Step 3: Close cover firmly until completely closed. The correct wire placement in the connector can be observed when cover is closed and the self-contained IDC connection will be complete. |
